You are currently on IBM Systems Media’s archival website. Click here to view our new website.


Bookmark and Share
RSS

Recent Posts

Work With Traces

July 10, 2012

In the 5.4 release, IBM introduced the Work with Traces (WRKTRC) command. This is a handy little utility that allows you to review all the traces that may be active on a partition, as well as a centralized interface for managing traces.

Why is the WRKTRC a convenient tool? IBM i has very strong diagnostic capabilities and one of the reasons is due to the wide variety of diagnostic data that you can collect. However, different types of diagnostic data are often collected in different ways. In fact, there are several different trace facilities available on i:

  • Job Trace
    Job trace (STRTRC) traces the program flow (among other things) within a job. I blogged about job trace some time ago in the article IBM i Job Trace. The Trace Job (TRCJOB) command still exists, but it now invokes STRTRC automatically. A little secret about Job Trace is that it uses Performance Explorer trace under the covers for the data collection; however, job trace does much more than just provide a customized interface over Performance Explorer.
  • Performance Job Trace
    Start Job Trace (STRJOBTRC) is a job trace function to collect performance statistics. As of the 6.1 release, it invokes STRTRC.
  • Performance Explorer
    Performance Explorer trace (STRPEX) is used to collect very detailed data, primarily intended for performance diagnostics.
  • Licensed Internal Code (LIC) traces
    LIC traces can be started by going into System Service Tools (SST) or Dedicated Service Tools (DST) and starting the LIC trace service function. The Trace Internal (TRCINT) command is a command interface to LIC trace that alleviates the need to go into SST or DST to start or manage your LIC traces.
  • Trace Connection
    The Trace Connection (TRCCNN) command, which provides a trace similar to a communications trace, actually does a LIC trace under the covers, so TRCCNN will start a TCP/IP or Sockets LIC trace.
  • Performance Trace
    Start Performance Trace (STRPFRTRC) collects multiprogramming level (MPL) and transaction LIC trace data. It actually invokes TRCINT to start a LIC trace.
  • Communications Trace
    Communications Trace (STRCMNTRC) is used to collect trace data as it flows over communications lines.
  • Trace TCP Application
    Trace TCP Application (TRCTCPAPP) is a specialized interface for starting traces specifically for a set of TCP/IP Application Servers. Of interest is that you can also start additional traces when you trace a TCP/IP application server, such as job traces or LIC traces.

As you can see, there are a wide variety of interfaces to collect trace data, but it really comes down to four basic types of trace data collection:

  • Job Trace
  • Performance Explorer
  • LIC Trace
  • Communications Trace

The Work with Traces command can allow you to manage any one (or all) of these traces. It has one parameter – the Trace (TRC) parameter – which allows you to specify which traces you want to work with. Supported values are:

  • *ALL – work with all traces
  • *CMN – work with communications traces
  • *JOB – work with job traces
  • *LIC – work with LIC traces
  • *PEX – work with Performance Explorer traces

When you first go into the WRKTRC interface, you will see the traces that are applicable based upon the TRC parameter. If there are no traces active, a message will be displayed stating that no traces are found. What's particularly useful with WRKTRC *ALL is it will show you all the traces that exist on the system in some form (active or ended); it is not uncommon to start a trace but forget that it is running; WRKTRC can help you determine if you have forgotten traces that are still running. Or perhaps you have a trace you started and ended, but never deleted (to free up storage); WRKTRC will show you those traces.

The F6 key allows you to start a new trace. You can then select the type of trace you want from the menu options listed. The appropriate command prompt interface for starting your selected trace is then displayed.

In the following screen capture, you will see an example of working with traces with one trace of each type active:

 

DawnMayWRKTRC1

 

The following screen capture is an example of working with traces when there is a trace of each type that has been ended:

 

DawnMayWRKTRC2

 

For any trace, you can take actions that are appropriate for that trace type and the state that it is in. Details of what actions are appropriate for what trace types can be found in the online help. The online help also describes the various statuses that can occur for each type of trace.

Finally, there are some additional diagnostic trace capabilities that exist on i that are not supported with WRKTRC; this is because these trace types are not commonly used any more. For example, Trace CPI Communications (TRCCPIC) and Trace ICF (TRCICF) are related to SNA communications functions. User Trace (xxxUSRTRC) is replaced with Job Trace.

 

Posted July 10, 2012| Permalink

-->